Obtaining information about a VTEP

Use this command to obtain information about a selected VTEP.

Syntax

vtep <vtep-alias> show <property>

where property is one of the following VTEP’s attributes:

  • name
  • description
  • management-ip
  • management-port
  • connection-state
  • tunnel-zone

Result

The command returns the following information about the VTEP:

  • name
  • description
  • management IP address (the same as the IP used with the command)
  • mgmt_port (the same as the port values used by the command)
  • tunnel IP addresses
  • connection state (one of: connected, disconnected, error. The state is error if the endpoint is not a VXLAN End Point)
  • the tunnel-zone to which this VTEP belongs.

Example

Successful command:

midonet> vtep vtep0 show id
ba2739df-87cf-458f-9ad2-39885cab217d
midonet> vtep vtep0 show management-ip
192.168.2.10
Questions? Discuss on Mailing Lists or Chat.
Found an error? Report a bug.


loading table of contents...