Removing a host from a tunnel zone

Use this procedure to remove a host from a tunnel zone.

  1. Enter the list tunnel-zone command to list the tunnel zone. For example:

    midonet> list tunnel-zone
    tzone tzone0 name default_tz type gre
  2. Enter the tunnel-zone tunnel-zone list member command to list the tunnel zone members (hosts). For example:

    midonet> tunnel-zone tzone0 list member
    zone tzone0 host host0 address 172.19.0.2
  3. Enter the tunnel-zone tunnel-zone member host host show command to show information about a specific host. For example:

    midonet> tunnel-zone tzone0 member host host0 show
    tunnel-zone-host zone tzone0 host host0 address 172.19.0.2
  4. Enter the tunnel-zone tunnel-zone member host host delete command to delete the desired host (identified by the host’s alias). For example:

    midonet> tunnel-zone tzone0 member host host0 delete
  5. (Optional) You can add the host back to the tunnel zone, using the tunnel-zone tunnel-zone member add host host address ip-address command as shown below:

    midonet> tunnel-zone tzone0 member add host host0 address 172.19.0.2
    zone tzone0 host host0 address 172.19.0.2
Questions? Discuss on Mailing Lists or Chat.
Found an error? Report a bug.


loading table of contents...